Home >> Products >> Thermal Solutions >> Cooler Module >> LW-9053B

LW-9053B Heat Flux module (Dummy Heater)

Specifications
1. The meter bar is made of copper.
2. The contact shape and dimension: Intel LGA3647 / LGA4189
3. Max. output power: 300 W or 600 W.
 The achievable power depends on the cooling capability of
 heat sink under test. The case temperature should be lower than 75°C
 to achieve the max. output power.
4. One T-type thermocouple to measure the case temperature Tc
5. Heaters embedded
6. Including over-temperature switches; the meter bar is surrounded by insulation material.
7. Dimension: 230 (W) x 230 (D) x 100 (H) mm (Ref.)
8. Customzied specifications accepted

LW-9053B Heat Flux module (Dummy Heater)



LW-9053 Heat Flux module (Dummy Heater) is installed in a thermal test duct behind LW-200T thermal wind tunnel.
LW-9053 Heat Flux module (Dummy Heater)
is installed in a thermal test duct behind LW-200T thermal wind tunnel.